Manca sempre una parte all'inizio

[FPcomputer]

4 ore fa, Killrob ha scritto:

ho capito solo ora cosa intendevi....

 

G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder

inserisci queste righe nello start gcode, queste ti fanno due righe, avanti ed indietro, sulla sinistra del piano di stampa per cominciare a mandare in pressione il nozzle

Il mio Gcode è questo:

G21 ;metric values

G90 ;absolute positioning

M82 ;set extruder to absolute mode

M107 ;start with the fan off

G28 X0 Y0 ;move X/Y to min endstops

G28 Z0 ;move Z to min endstops

G1 Z15.0 F{speed_travel} ;move the platform down 15mm

G92 E0 ;zero the extruded length

G1 F200 E3 ;extrude 3mm of feed stock

G92 E0 ;zero the extruded length again

G1 F{speed_travel}

M117 Printing...

G5

 

In che riga le inserisco ?

[Killrob]

Sopra

[Mino]

10 ore fa, FPcomputer ha scritto:

Il mio Gcode è questo:

G21 ;metric values

G90 ;absolute positioning

M82 ;set extruder to absolute mode

M107 ;start with the fan off

G28 X0 Y0 ;move X/Y to min endstops

G28 Z0 ;move Z to min endstops

G1 Z15.0 F{speed_travel} ;move the platform down 15mm

G92 E0 ;zero the extruded length

G1 F200 E3 ;extrude 3mm of feed stock

G92 E0 ;zero the extruded length again

G1 F{speed_travel}

M117 Printing...

G5

 

In che riga le inserisco ?

Modifica la riga G1 F200 E3 in G1 F200 E20

[FPcomputer]

G21 ;metric values

G90 ;absolute positioning

M82 ;set extruder to absolute mode

M107 ;start with the fan off

G28 X0 Y0 ;move X/Y to min endstops

G28 Z0 ;move Z to min endstops

G1 Z15.0 F{speed_travel} ;move the platform down 15mm

G92 E0 ;zero the extruded length

G1 F200 E20 ;extrude 3mm of feed stock

G92 E0 ;zero the extruded length again

G1 F{speed_travel}

M117 Printing...

G5

 

Cosi ?

[Mino]

30 minuti fa, FPcomputer ha scritto:

G21 ;metric values

G90 ;absolute positioning

M82 ;set extruder to absolute mode

M107 ;start with the fan off

G28 X0 Y0 ;move X/Y to min endstops

G28 Z0 ;move Z to min endstops

G1 Z15.0 F{speed_travel} ;move the platform down 15mm

G92 E0 ;zero the extruded length

G1 F200 E20 ;extrude 3mm of feed stock

G92 E0 ;zero the extruded length again

G1 F{speed_travel}

M117 Printing...

G5

 

Cosi ?

Esatto