Buongiorno a tutti, sto avendo problemi ad aggiornare il firmware alla mia stampante ender 3 pro. Vorrei iniziare ad usare Marlin 2 principalmente per poter modificare il parametro del linear advance. La mia stampante monta una scheda melzi v1.1.6.2 e processore atmega1284p. (foto) Ho scaricato il firmware e la cartella Configurations dal sito ufficiale Marlin. Ho estratto i file di esempio per la Creality ender 3 pro v1 ed ho copiato le 4 cartelle (config, config_advance, Bootscreen e StatusScreen) nella cartella Marlin. Utilizzando Platform.io su Visual Studio Code ho aperto la cartella Marlin 2.1.2, ho controllato i file configuartion.h e configuration_adv.h (dove ho decommentato l'impostazione del linear advance). Ho provato a compilare ma mi da errore, credo che il problema siano le impostazioni nel file Platformio.ini che non riesco proprio a capire come mettere. (ho provato diverse combinazioni ma mi da sempre qualche errore) Qualcuno sa aiutarmi? Grazie mille, questo è il contenuto del file Platformio.ini: # # Marlin Firmware # PlatformIO Configuration File # # For detailed documentation with EXAMPLES: # # https://docs.platformio.org/en/latest/projectconf/index.html # # Automatic targets - enable auto-uploading #targets = upload [platformio] src_dir = Marlin boards_dir = buildroot/share/PlatformIO/boards default_envs = melzi include_dir = Marlin extra_configs = Marlin/config.ini ini/avr.ini ini/due.ini ini/esp32.ini ini/features.ini ini/lpc176x.ini ini/native.ini ini/samd21.ini ini/samd51.ini ini/stm32-common.ini ini/stm32f0.ini ini/stm32f1-maple.ini ini/stm32f1.ini ini/stm32f4.ini ini/stm32f7.ini ini/stm32h7.ini ini/stm32g0.ini ini/teensy.ini ini/renamed.ini # # The 'common' section applies to most Marlin builds. # # By default platformio build will abort after 5 errors. # Remove '-fmax-errors=5' from build_flags below to see all. # [common] build_flags = -g3 -D__MARLIN_FIRMWARE__ -DNDEBUG -fmax-errors=5 extra_scripts = pre:buildroot/share/PlatformIO/scripts/configuration.py pre:buildroot/share/PlatformIO/scripts/common-dependencies.py pre:buildroot/share/PlatformIO/scripts/common-cxxflags.py pre:buildroot/share/PlatformIO/scripts/preflight-checks.py post:buildroot/share/PlatformIO/scripts/common-dependencies-post.py lib_deps = default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared> -<src/tests> -<src/lcd/HD44780> -<src/lcd/TFTGLCD> -<src/lcd/dogm> -<src/lcd/tft> -<src/lcd/tft_io> -<src/HAL/STM32/tft> -<src/HAL/STM32F1/tft> -<src/lcd/e3v2/common> -<src/lcd/e3v2/creality> -<src/lcd/e3v2/proui> -<src/lcd/e3v2/jyersui> -<src/lcd/e3v2/marlinui> -<src/lcd/menu> -<src/lcd/menu/game/game.cpp> -<src/lcd/menu/game/brickout.cpp> -<src/lcd/menu/game/invaders.cpp> -<src/lcd/menu/game/maze.cpp> -<src/lcd/menu/game/snake.cpp> -<src/lcd/menu/menu_backlash.cpp> -<src/lcd/menu/menu_bed_corners.cpp> -<src/lcd/menu/menu_bed_leveling.cpp> -<src/lcd/menu/menu_cancelobject.cpp> -<src/lcd/menu/menu_delta_calibrate.cpp> -<src/lcd/menu/menu_filament.cpp> -<src/lcd/menu/menu_info.cpp> -<src/lcd/menu/menu_job_recovery.cpp> -<src/lcd/menu/menu_language.cpp> -<src/lcd/menu/menu_led.cpp> -<src/lcd/menu/menu_media.cpp> -<src/lcd/menu/menu_mmu2.cpp> -<src/lcd/menu/menu_password.cpp> -<src/lcd/menu/menu_power_monitor.cpp> -<src/lcd/menu/menu_spindle_laser.cpp> -<src/lcd/menu/menu_temperature.cpp> -<src/lcd/menu/menu_tmc.cpp> -<src/lcd/menu/menu_touch_screen.cpp> -<src/lcd/menu/menu_tramming.cpp> -<src/lcd/menu/menu_ubl.cpp> -<src/lcd/menu/menu_x_twist.cpp> -<src/lcd/extui/anycubic_chiron> -<src/lcd/extui/anycubic_i3mega> -<src/lcd/extui/dgus> -<src/lcd/extui/dgus/fysetc> -<src/lcd/extui/dgus/hiprecy> -<src/lcd/extui/dgus/mks> -<src/lcd/extui/dgus/origin> -<src/lcd/extui/dgus_reloaded> -<src/lcd/extui/example> -<src/lcd/extui/ftdi_eve_touch_ui> -<src/lcd/extui/malyan> -<src/lcd/extui/mks_ui> -<src/lcd/extui/nextion> -<src/lcd/lcdprint.cpp> -<src/lcd/touch/touch_buttons.cpp> -<src/sd/usb_flashdrive/lib-uhs2> -<src/sd/usb_flashdrive/lib-uhs3> -<src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp> -<src/sd/cardreader.cpp> -<src/sd/Sd2Card.cpp> -<src/sd/SdBaseFile.cpp> -<src/sd/SdFatUtil.cpp> -<src/sd/SdFile.cpp> -<src/sd/SdVolume.cpp> -<src/HAL/shared/backtrace> -<src/HAL/shared/cpu_exception> -<src/HAL/shared/eeprom_if_i2c.cpp> -<src/HAL/shared/eeprom_if_spi.cpp> -<src/feature/adc> -<src/gcode/feature/adc> -<src/feature/ammeter.cpp> -<src/feature/babystep.cpp> -<src/feature/backlash.cpp> -<src/feature/baricuda.cpp> -<src/gcode/feature/baricuda> -<src/feature/bedlevel/abl> -<src/gcode/bedlevel/abl> -<src/feature/bedlevel/bdl> -<src/gcode/probe/M102.cpp> -<src/feature/bedlevel/mbl> -<src/gcode/bedlevel/mbl> -<src/feature/bedlevel/ubl> -<src/gcode/bedlevel/ubl> -<src/feature/bedlevel/hilbert_curve.cpp> -<src/feature/binary_stream.cpp> -<src/libs/heatshrink> -<src/feature/bltouch.cpp> -<src/feature/cancel_object.cpp> -<src/gcode/feature/cancel> -<src/feature/caselight.cpp> -<src/gcode/feature/caselight> -<src/feature/closedloop.cpp> -<src/feature/controllerfan.cpp> -<src/gcode/feature/controllerfan> -<src/feature/cooler.cpp> -<src/gcode/temp/M143_M193.cpp> -<src/feature/dac> -<src/feature/digipot> -<src/feature/direct_stepping.cpp> -<src/gcode/motion/G6.cpp> -<src/feature/e_parser.cpp> -<src/feature/easythreed_ui.cpp> -<src/feature/encoder_i2c.cpp> -<src/feature/ethernet.cpp> -<src/gcode/feature/network/M552-M554.cpp> -<src/feature/fancheck.cpp> -<src/feature/fanmux.cpp> -<src/feature/filwidth.cpp> -<src/gcode/feature/filwidth> -<src/feature/fwretract.cpp> -<src/gcode/feature/fwretract> -<src/feature/host_actions.cpp> -<src/feature/hotend_idle.cpp> -<src/feature/joystick.cpp> -<src/feature/leds/blinkm.cpp> -<src/feature/leds/leds.cpp> -<src/feature/leds/neopixel.cpp> -<src/feature/leds/pca9533.cpp> -<src/feature/leds/pca9632.cpp> -<src/feature/leds/printer_event_leds.cpp> -<src/feature/leds/tempstat.cpp> -<src/feature/max7219.cpp> -<src/feature/meatpack.cpp> -<src/feature/mixing.cpp> -<src/feature/mmu/mmu.cpp> -<src/feature/mmu/mmu2.cpp> -<src/gcode/feature/prusa_MMU2> -<src/feature/password> -<src/gcode/feature/password> -<src/feature/pause.cpp> -<src/feature/power.cpp> -<src/feature/power_monitor.cpp> -<src/gcode/feature/power_monitor> -<src/feature/powerloss.cpp> -<src/gcode/feature/powerloss> -<src/feature/probe_temp_comp.cpp> -<src/feature/repeat.cpp> -<src/feature/runout.cpp> -<src/gcode/feature/runout> -<src/feature/snmm.cpp> -<src/feature/solenoid.cpp> -<src/gcode/control/M380_M381.cpp> -<src/feature/spindle_laser.cpp> -<src/gcode/control/M3-M5.cpp> -<src/feature/stepper_driver_safety.cpp> -<src/feature/tmc_util.cpp> -<src/module/stepper/trinamic.cpp> -<src/feature/tramming.cpp> -<src/feature/twibus.cpp> -<src/feature/x_twist.cpp> -<src/gcode/probe/M423.cpp> -<src/feature/z_stepper_align.cpp> -<src/gcode/bedlevel/G26.cpp> -<src/gcode/bedlevel/G35.cpp> -<src/gcode/bedlevel/G42.cpp> -<src/gcode/bedlevel/M420.cpp> -<src/feature/bedlevel/bedlevel.cpp> -<src/gcode/calibrate/G33.cpp> -<src/gcode/calibrate/G34.cpp> -<src/gcode/calibrate/G34_M422.cpp> -<src/gcode/calibrate/G76_M871.cpp> -<src/gcode/calibrate/G425.cpp> -<src/gcode/calibrate/M12.cpp> -<src/gcode/calibrate/M48.cpp> -<src/gcode/calibrate/M100.cpp> -<src/gcode/calibrate/M425.cpp> -<src/gcode/calibrate/M665.cpp> -<src/gcode/calibrate/M666.cpp> -<src/gcode/calibrate/M852.cpp> -<src/gcode/control/M10-M11.cpp> -<src/gcode/control/M42.cpp> -<src/gcode/control/M226.cpp> -<src/gcode/config/M43.cpp> -<src/gcode/config/M217.cpp> -<src/gcode/config/M218.cpp> -<src/gcode/config/M221.cpp> -<src/gcode/config/M301.cpp> -<src/gcode/config/M302.cpp> -<src/gcode/config/M304.cpp> -<src/gcode/config/M305.cpp> -<src/gcode/config/M540.cpp> -<src/gcode/config/M575.cpp> -<src/gcode/config/M672.cpp> -<src/gcode/control/M7-M9.cpp> -<src/gcode/control/M211.cpp> -<src/gcode/control/M350_M351.cpp> -<src/gcode/control/M605.cpp> -<src/gcode/feature/advance> -<src/gcode/feature/camera> -<src/gcode/feature/i2c> -<src/gcode/feature/input_shaping> -<src/gcode/feature/L6470> -<src/gcode/feature/leds/M150.cpp> -<src/gcode/feature/leds/M7219.cpp> -<src/gcode/feature/macro> -<src/gcode/feature/mixing/M163-M165.cpp> -<src/gcode/feature/mixing/M166.cpp> -<src/gcode/feature/pause/G27.cpp> -<src/gcode/feature/pause/G60.cpp> -<src/gcode/feature/pause/G61.cpp> -<src/gcode/feature/pause/M125.cpp> -<src/gcode/feature/pause/M600.cpp> -<src/gcode/feature/pause/M603.cpp> -<src/gcode/feature/pause/M701_M702.cpp> -<src/gcode/feature/trinamic/M122.cpp> -<src/gcode/feature/trinamic/M569.cpp> -<src/gcode/feature/trinamic/M906.cpp> -<src/gcode/feature/trinamic/M911-M914.cpp> -<src/gcode/feature/trinamic/M919.cpp> -<src/gcode/geometry/G17-G19.cpp> -<src/gcode/geometry/G53-G59.cpp> -<src/gcode/geometry/M206_M428.cpp> -<src/gcode/host/M16.cpp> -<src/gcode/host/M113.cpp> -<src/gcode/host/M154.cpp> -<src/gcode/host/M360.cpp> -<src/gcode/host/M876.cpp> -<src/gcode/lcd/M0_M1.cpp> -<src/gcode/lcd/M73.cpp> -<src/gcode/lcd/M117.cpp> -<src/gcode/lcd/M250.cpp> -<src/gcode/lcd/M255.cpp> -<src/gcode/lcd/M256.cpp> -<src/gcode/lcd/M300.cpp> -<src/gcode/lcd/M414.cpp> -<src/gcode/lcd/M995.cpp> -<src/gcode/motion/G2_G3.cpp> -<src/gcode/motion/G5.cpp> -<src/gcode/motion/G80.cpp> -<src/gcode/motion/M290.cpp> -<src/gcode/probe/G30.cpp> -<src/gcode/probe/G31_G32.cpp> -<src/gcode/probe/G38.cpp> -<src/gcode/probe/M401_M402.cpp> -<src/gcode/probe/M851.cpp> -<src/gcode/probe/M951.cpp> -<src/gcode/scara> -<src/gcode/sd> -<src/gcode/sd/M32.cpp> -<src/gcode/sd/M808.cpp> -<src/gcode/temp/M104_M109.cpp> -<src/gcode/temp/M123.cpp> -<src/gcode/temp/M155.cpp> -<src/gcode/temp/M192.cpp> -<src/gcode/temp/M306.cpp> -<src/gcode/units/G20_G21.cpp> -<src/gcode/units/M82_M83.cpp> -<src/gcode/units/M149.cpp> -<src/libs/BL24CXX.cpp> -<src/libs/W25Qxx.cpp> -<src/libs/L64XX> -<src/module/stepper/L64xx.cpp> -<src/HAL/shared/HAL_spi_L6470.cpp> -<src/libs/MAX31865.cpp> -<src/libs/hex_print.cpp> -<src/libs/least_squares_fit.cpp> -<src/libs/nozzle.cpp> -<src/gcode/feature/clean> -<src/module/planner_bezier.cpp> -<src/module/polargraph.cpp> -<src/module/printcounter.cpp> -<src/module/probe.cpp> -<src/module/scara.cpp> -<src/module/servo.cpp> -<src/gcode/control/M280.cpp> -<src/gcode/config/M281.cpp> -<src/gcode/control/M282.cpp> -<src/module/stepper/TMC26X.cpp> # # Default values apply to all 'env:' prefixed environments # [env:ATmega1284P] platform = atmelavr board = ATmega1284P framework = arduino extra_scripts = ${common.extra_scripts} build_flags = ${common.build_flags} lib_deps = ${common.lib_deps} monitor_speed = 115200

Aggiornamento firmware Marlin 2

Da TOAD
30 Gennaio 2023 in Software di slicing, firmware e GCode

Seguaci 1

Vai alla soluzione Risolta da Truck64, 31 Gennaio 2023

Messaggi raccomandati

TOAD

Inviato 1 Febbraio 2023

Autore

- Condividi

Inviato 1 Febbraio 2023

Grazie mille a tutti per l'aiuto,

credo che opterò come suggerito per una nuova scheda.

Cita

Link al commento

Condividi su altri siti

Miglior contributo in questa discussione

Giorni Popolari

Miglior contributo in questa discussione

TOAD 5 messaggi
fratt 3 messaggi
Truck64 2 messaggi
dnasini 1 messaggio

Giorni Popolari

Messaggi Popolari

Truck64

31 Gennaio 2023

Non ho provato direttamente ma credo che il problema sia la carenza di memoria per il firmware. Hai un processore a 8bit con la metà della memoria di un arduino mega, non penso che si possa caricare i

Truck64

31 Gennaio 2023

Mi sembra che tua sia arrivato allo stesso problema mostrato in questo video: Alla tua scheda potrebbe mancare il bootloader. Se è quello il tuo problema la procedura per caricarlo è un