pierpari Inviato 21 Novembre 2017 Condividi Inviato 21 Novembre 2017 Ciao a tutti. Ho acquistato il 3d touch auto leveling sensor e dopo averlo montato passo alle modifiche del firmware. Ed è a questo punto che mi accorgo che arduino non mi compila più lo sketch. Queste sono le ultime righe dell'errore che mi restituisce: arduino-builder ha restituito 2 Errore durante la compilazione per la scheda Arduino Mega ADK. Dall'ultima volta che ho compilato il firmware ho aggiornato l'OS del mio iMac a High Sierra. Potrebbe essere questo il problema? Qualcuno con High Sierra ha riscontrato lo stesso problema? Grazie come sempre per i preziosi aiuti Cita Link al commento Condividi su altri siti Altre opzioni di condivisione...
Alep Inviato 21 Novembre 2017 Condividi Inviato 21 Novembre 2017 Servono le prime righe dell'errore non le ultime, ma la cosa più probabile è che facendo la modifica abbia fatto qualche errore di sintassi nel compilatore. Se guardi nelle prime righe del log di errore ti dice il numero di riga che contiene il problema.. Per fare una prova veloce prova a compilare il firmware prima delle modifiche, Poi assicurati in arduino che come processore sia regolato per il tuo processore che al 99% è un atmega 2560 Cita Link al commento Condividi su altri siti Altre opzioni di condivisione...
pierpari Inviato 21 Novembre 2017 Autore Condividi Inviato 21 Novembre 2017 3 ore fa, Alep dice: Servono le prime righe dell'errore non le ultime, ma la cosa più probabile è che facendo la modifica abbia fatto qualche errore di sintassi nel compilatore. Se guardi nelle prime righe del log di errore ti dice il numero di riga che contiene il problema.. Per fare una prova veloce prova a compilare il firmware prima delle modifiche, Poi assicurati in arduino che come processore sia regolato per il tuo processore che al 99% è un atmega 2560 Ciao Alep. Non si tratta di un errore si sintassi. Avevo già provato a compilare il firmware senza le modifiche. Per maggiore sicurezza ho anche scaricato nuovamente il firmware originale e ho provato a compilare anche quello ma niente. Ecco le prime righe dell'errore: failed MSpanList_Insert 0x30c000 0x99f52b628e2 0x0 fatal error: MSpanList_Insert runtime stack: runtime.throw(0x2ac50b) /usr/local/go/src/runtime/panic.go:491 +0xad fp=0x7ffeefbff450 sp=0x7ffeefbff420 runtime.MSpanList_Insert(0x2ca128, 0x30c000) Per quanto riguarda il processore invece da dove si regola? Cercando fra gli Strumenti ho visto che bisogna selezionare anche il "Programmatore". Quale devo selezionare? Cmq si, il processore dovrebbe essere atmega 2560. Grazie Cita Link al commento Condividi su altri siti Altre opzioni di condivisione...
Alep Inviato 21 Novembre 2017 Condividi Inviato 21 Novembre 2017 Il programmatore non serve in questi casi. Non è che stai usando la versione sbagliata di Arduino? Dal codice di errore non dovrebbe essere questo il problema ma comunque ti ricordo che a seconda del marlin che usi devi utilizzare arduino versione 1,0,6 mentre nei marlin recenti devi usare le ultime versionei. Adesso non posso poi vedo se riesco a capire cosa è questo messaggio di errore Cita Link al commento Condividi su altri siti Altre opzioni di condivisione...
pierpari Inviato 21 Novembre 2017 Autore Condividi Inviato 21 Novembre 2017 18 minuti fa, Alep dice: Il programmatore non serve in questi casi. Non è che stai usando la versione sbagliata di Arduino? Dal codice di errore non dovrebbe essere questo il problema ma comunque ti ricordo che a seconda del marlin che usi devi utilizzare arduino versione 1,0,6 mentre nei marlin recenti devi usare le ultime versionei. Adesso non posso poi vedo se riesco a capire cosa è questo messaggio di errore io uso arduino 1.6.9. Ma ha funzionato fino a qualche giorno fa. Ho provato anche a scaricare altre versioni compreso il web editor, in modo da svincolarmi da possibili cause dovute al mio OS, ma li mi da un altro tipo di errore e cioè questo: ./opt/arduino-builder/arduino-builder -compile -core-api-version 10611 -build-path /tmp/147837919/build -hardware opt/arduino-builder/hardware -hardware ./opt/cores -tools opt/arduino-builder/tools -tools ./opt/tools -built-in-libraries opt/libraries/latest -libraries /tmp/147837919/pinned -libraries /tmp/147837919/custom -fqbn arduino:avr:megaADK -build-cache /tmp -logger humantags -verbose=true /tmp/147837919/Marlin Using board 'megaADK' from platform in folder: /home/admin/builder/opt/cores/arduino/avr Using core 'arduino' from platform in folder: /home/admin/builder/opt/cores/arduino/avr Detecting libraries used... "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "/tmp/147837919/build/sketch/Marlin.ino.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/Marlin.ino.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/BlinkM.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/ConfigurationStore.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/LiquidCrystalRus.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/MarlinSerial.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/Marlin_main.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/Sd2Card.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/SdBaseFile.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/SdFatUtil.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/SdFile.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/SdVolume.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/Servo.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/cardreader.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/digipot_mcp4451.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/motion_control.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/planner.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/qr_solve.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/stepper.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/temperature.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/ultralcd.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/vector_3.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/watchdog.cpp" -o "/dev/null" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src/LiquidCrystal.cpp" -o "/dev/null" Generating function prototypes... "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/Marlin.ino.cpp" -o "/tmp/147837919/build/preproc/ctags_target_for_gcc_minus_e.cpp" "/home/admin/builder/opt/arduino-builder/tools/arduino-preprocessor/0.1.3/arduino-preprocessor" "/tmp/147837919/build/preproc/ctags_target_for_gcc_minus_e.cpp" "" -- -std=gnu++11 Compiling sketch... "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/Servo.cpp" -o "/tmp/147837919/build/sketch/Servo.cpp.o" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/BlinkM.cpp" -o "/tmp/147837919/build/sketch/BlinkM.cpp.o" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/ConfigurationStore.cpp" -o "/tmp/147837919/build/sketch/ConfigurationStore.cpp.o" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/LiquidCrystalRus.cpp" -o "/tmp/147837919/build/sketch/LiquidCrystalRus.cpp.o" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/qr_solve.cpp" -o "/tmp/147837919/build/sketch/qr_solve.cpp.o" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/stepper.cpp" -o "/tmp/147837919/build/sketch/stepper.cpp.o" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/Marlin.ino.cpp" -o "/tmp/147837919/build/sketch/Marlin.ino.cpp.o" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/MarlinSerial.cpp" -o "/tmp/147837919/build/sketch/MarlinSerial.cpp.o" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/Marlin_main.cpp" -o "/tmp/147837919/build/sketch/Marlin_main.cpp.o" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/Sd2Card.cpp" -o "/tmp/147837919/build/sketch/Sd2Card.cpp.o" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/temperature.cpp" -o "/tmp/147837919/build/sketch/temperature.cpp.o" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/SdBaseFile.cpp" -o "/tmp/147837919/build/sketch/SdBaseFile.cpp.o" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/ultralcd.cpp" -o "/tmp/147837919/build/sketch/ultralcd.cpp.o" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/vector_3.cpp" -o "/tmp/147837919/build/sketch/vector_3.cpp.o" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/cardreader.cpp" -o "/tmp/147837919/build/sketch/cardreader.cpp.o" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/watchdog.cpp" -o "/tmp/147837919/build/sketch/watchdog.cpp.o" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/SdFatUtil.cpp" -o "/tmp/147837919/build/sketch/SdFatUtil.cpp.o" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/SdFile.cpp" -o "/tmp/147837919/build/sketch/SdFile.cpp.o" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/SdVolume.cpp" -o "/tmp/147837919/build/sketch/SdVolume.cpp.o" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/digipot_mcp4451.cpp" -o "/tmp/147837919/build/sketch/digipot_mcp4451.cpp.o" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/motion_control.cpp" -o "/tmp/147837919/build/sketch/motion_control.cpp.o" "/home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_ADK -DARDUINO_ARCH_AVR "-I/home/admin/builder/opt/cores/arduino/avr/cores/arduino" "-I/home/admin/builder/opt/cores/arduino/avr/variants/mega" "-I/home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7/src" "/tmp/147837919/build/sketch/planner.cpp" -o "/tmp/147837919/build/sketch/planner.cpp.o" Using library liquidcrystal-1-0-7 at version 1.0.7 in folder: /home/admin/builder/opt/libraries/latest/liquidcrystal-1-0-7 In file included from /tmp/147837919/build/sketch/SdFile.h:27:0, from /tmp/147837919/build/sketch/SdFile.cpp:23: /tmp/147837919/build/sketch/SdBaseFile.h:38:8: error: using typedef-name 'fpos_t' after 'struct' struct fpos_t { ^ In file included from /tmp/147837919/build/sketch/Marlin.h:10:0, from /tmp/147837919/build/sketch/SdFile.cpp:20: /home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/avr/include/stdio.h:950:33: note: 'fpos_t' has a previous declaration here __extension__ typedef long long fpos_t; ^ In file included from /tmp/147837919/build/sketch/SdFile.h:27:0, from /tmp/147837919/build/sketch/cardreader.h:8, from /tmp/147837919/build/sketch/stepper.cpp:30: /tmp/147837919/build/sketch/SdBaseFile.h:38:8: error: using typedef-name 'fpos_t' after 'struct' struct fpos_t { ^ In file included from /tmp/147837919/build/sketch/Marlin.h:10:0, from /tmp/147837919/build/sketch/stepper.cpp:24: /home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/avr/include/stdio.h:950:33: note: 'fpos_t' has a previous declaration here __extension__ typedef long long fpos_t; ^ In file included from /tmp/147837919/build/sketch/SdBaseFile.cpp:24:0: /tmp/147837919/build/sketch/SdBaseFile.h:38:8: error: using typedef-name 'fpos_t' after 'struct' struct fpos_t { ^ In file included from /tmp/147837919/build/sketch/Marlin.h:10:0, from /tmp/147837919/build/sketch/SdBaseFile.cpp:21: /home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/avr/include/stdio.h:950:33: note: 'fpos_t' has a previous declaration here __extension__ typedef long long fpos_t; ^ /tmp/147837919/build/sketch/SdBaseFile.cpp: In member function 'void SdBaseFile::getpos(fpos_t*)': /tmp/147837919/build/sketch/SdBaseFile.cpp:298:8: error: request for member 'position' in '* pos', which is of non-class type 'fpos_t {aka long long int}' pos->position = curPosition_; ^ /tmp/147837919/build/sketch/SdBaseFile.cpp:299:8: error: request for member 'cluster' in '* pos', which is of non-class type 'fpos_t {aka long long int}' pos->cluster = curCluster_; ^ /tmp/147837919/build/sketch/SdBaseFile.cpp: In member function 'void SdBaseFile::setpos(fpos_t*)': /tmp/147837919/build/sketch/SdBaseFile.cpp:1496:23: error: request for member 'position' in '* pos', which is of non-class type 'fpos_t {aka long long int}' curPosition_ = pos->position; ^ /tmp/147837919/build/sketch/SdBaseFile.cpp:1497:22: error: request for member 'cluster' in '* pos', which is of non-class type 'fpos_t {aka long long int}' curCluster_ = pos->cluster; ^ In file included from /tmp/147837919/build/sketch/SdFile.h:27:0, from /tmp/147837919/build/sketch/cardreader.h:8, from /tmp/147837919/build/sketch/cardreader.cpp:2: /tmp/147837919/build/sketch/SdBaseFile.h:38:8: error: using typedef-name 'fpos_t' after 'struct' struct fpos_t { ^ In file included from /tmp/147837919/build/sketch/Marlin.h:10:0, from /tmp/147837919/build/sketch/cardreader.cpp:1: /home/admin/builder/opt/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/avr/include/stdio.h:950:33: note: 'fpos_t' has a previous declaration here __extension__ typedef long long fpos_t; ^ exit status 1 Cita Link al commento Condividi su altri siti Altre opzioni di condivisione...
pierpari Inviato 21 Novembre 2017 Autore Condividi Inviato 21 Novembre 2017 Ho risolto usando la versione 1.0.1 Continuo a non capire perché la 1.6.9 ha smesso di funzionare Grazie Cita Link al commento Condividi su altri siti Altre opzioni di condivisione...
pierpari Inviato 21 Novembre 2017 Autore Condividi Inviato 21 Novembre 2017 Comunque se sapete come risolvere il problema del web editor, datemi la dritta perché potrebbe essere un ottimo strumento Cita Link al commento Condividi su altri siti Altre opzioni di condivisione...
Messaggi raccomandati
Partecipa alla conversazione
Puoi pubblicare ora e registrarti più tardi. Se hai un account, accedi ora per pubblicarlo con il tuo account.